Neuste Firmware (ab 2019)

Neuste Firmware (ab 2019) 3.29b17 (Vorabversion der 3.30)

Keine Rechte zum Download
Release-Date: 25.10.2022

Changelog:
Verbesserungen:
  • Zone Keeper Funktion, wenn Zonen aktiviert sind
  • Neue Firmware für WLAN
  • Neue Firmware für Off LImits
  • Verhalten im Tunnelmodus
Fixes:
  • Seltenes Motor Update Problem (ER80 im Display)
  • Texte die nicht ins Display gepasst haben
  • Verbesserter Geo-Filter für FindMyLandroid
  • WLAN Firmware Authentifizierung
  • FindMyLandroid Update
  • Problem beim Off Limits mit nur einem Sensor bei Rechtsdrehen und Treffen des Begrenzungskabels
Release-Date: 01.09.2022

Changelog:
Code:
Changelog Firmware 3.28b1

New AIA movement. Landroid will now execute smooth turns on the boundary wire instead of stopping and turning. This will improve efficiency and create less tear on the lawn.
Improved avoidance of Off Limits breakthroughs
Improved App-Link
Improved LCD refresh
Improved charging station recognition
Bluetooth always enabled, not require start app-link after first pair (only models with Bluetooth)
Fixed start sequence if mower is removed from charging station manually
Added smart battery support
Improved charge station leaving movement after finishing border cut
Adjusted battery percentage behavior:
   1. Mower is inside the charging station:
        Requires 30% charge to start
   2. Mower is in idle state:
        Requires 10% charge to start
   3. If less than 10% charge only home + start is permitted
   4. If less than 5% charge no user action is permitted
Fixed several minor bugs

The Worx Landroid team would like to thank our amazing beta testers that helped to discover the new AIA movement and tested with hundreds of hours of their own free time to make this firmware possible.
Release-Date: 03.08.2022

Diese Vorabversion wird NICHT Over-The-Air (OTA) verteilt, sondern steht ausschließlich zum manuellen Download zur Verfügung.

Changelog im Vergleich zur 3.27b5:
Code:
Probleme mit WLan behoben
Manöver bei spitzen Ecken geändert
Release-Date: 20.07.2022

Diese Vorabversion wird NICHT Over-The-Air (OTA) verteilt, sondern steht ausschließlich zum manuellen Download zur Verfügung.

Changelog:
Code:
Neues AIA-Manöver. Der Landroid führt nun sanfte Drehungen am Begrenzungskabel aus, anstatt zu stoppen und zu drehen. Dies verbessert die Effizienz und verursacht weniger Beansprachungen auf dem Rasen.
Verbesserte Vermeidung von Durchbrüchen bei Off Limits
Verbesserter App-Link
Verbesserte LCD-Aktualisierung
Verbesserte Erkennung von Ladestationen
Verbesserte Startsequenz, wenn der Mäher manuell von der Ladestation entfernt wird
Unterstützung für intelligente Akkus hinzugefügt
Geänderter Winkel nach Beendigung des Rasenkantenschnitts
Das Verhalten der Batterie in Prozent wurde angepasst:
Mäher befindet sich in der Ladestation:
Erfordert 30% Ladung zum Starten
Mäher befindet sich im Leerlauf:
Benötigt 10% Ladung zum Starten
Bei weniger als 10 % Ladung ist nur Home + Start erlaubt
Bei weniger als 5% Ladung ist keine Benutzeraktion erlaubt
Mehrere kleinere Fehler behoben
Release Date:
2021-09-17

Changelog:
Code:
Improvement on Traction Wheel Torque
New Log format
Bugfix & Improvement for new app release
Improved detection of charging station detection
Models with Knob: Knob will be enabled only when mower is in idle or at home (prevent unwanted activations)
WR147E is now enabled to work with bluetooth 
Fixed a bug who stop the mower saying trap timeout 
Fixed a bug on FML which occasionally is unable to send coordinates in stolen mode

A special thanks to our awesome beta testers:
huschel5, sookie, SDeath, afterburger, Bostil, SteffenBank, Jellyneck, hsteinme, JSC, wellenbrecher, Andreas62, Djub, MGFirewater, AHoh78, DonToben, icastrox, Krautmaster, Passerati, Janek.Chef, Bullit, Harry55, Truce, And other anonymous testers
Release Date:
2021-09-06 (Forum-Only Release)

Changelog:
Code:
Main Firmware
• [improvement] New Torque algorithm management
• [improvement] Knob is enabled only when mower is still (idle or home)
• [APP] various fix for new app
• [FIX] Trapped Timeout error
• [FIX] Bluetooth management
• [FIX] Charge Station detection improved
• [WiFi][FIX] small bugfix

Accessory
• [FML][FIX] position anti thief mode and Json

Other
• [KRESS MEGA][FIX] increased inwheel motor overheat protection limit
Weitere Infos & Anleitungen zu den neuen Features:
Roboter-Forum.com - Worx Landroid : Firmwarethread zur Version V3.25b36 (Vorabversion der 3.26)
  • Gefällt mir
Reaktionen: Bitburger
Release Date:
2021-07-08

Changelog:
Code:
New feature for ShortCut (refer to knowledge base at https://support.worx-europe.com/en/shortcut)
New feature for Auto-Lock mower's keyboard (refer to knowledge base athttps://support.worx-europe.com/en/auto-lock)
Improved motor performances for slopes & rough environment
Improved movement with obstacles near boundary wire (trap)
Fixed an issue that prevent to correctly configure WiFi SSID containing spaces
Minor Bug fixes and improvements
Weitere Infos & Anleitungen zu den neuen Features:
Roboter-Forum.com - Worx Landroid : Firmwarethread zur Version 3.25
  • Gefällt mir
Reaktionen: Bitburger
Release Date:
2021-07-01 (Forum-Only Release)

Changelog:
Code:
New feature for ShortCut
New feature for Auto-Lock
Improved motor performances for slopes & rough environment
Improved movement with obstacles near boundary wire (trap)
Fixed an issue that prevent to correctly configure WiFi SSID containing spaces
Minor Bug fixes and improvements
[kress MEGA] Improvement of Kress-Mega motor performance
[kress MEGA] Minor Bug fixes and improvements
Weitere Infos & Anleitungen zu den neuen Features:
Roboter-Forum.com - Worx Landroid : Firmwarethread zur Version V3.24b27 (Vorabversion der 3.25)
Release Date:
2021-05-19

Changelog:
Code:
-Fixed blade motor blocked problem, fixed fake wheel trap and fixed collision with contacts when leaving charge station.
-Fixed Accessory missing occasionally
-improve obstacle avoidance, the mower will make a small left turn to avoid obstacle on the right side of the boundary wire
-New firmware logic to improve hi/dense grass cut performance, the mower will adapt the speed of the mower if the load on the blade is too high
-New mower behaviour on inclined grass surfaces to increase the grip, should solve "out of boundary errors"
-Improved app pause command, sometimes app was reporting an error when the user pressed pause button
-Unified "App Link" text on LCD interface (app pairing page)
Release Date:
2021-05-14 (ForumOnly-Release)

Changelog:
Code:
-New motor firmware to improve motor performance: fixed blade motor blocked problem, fixed fake wheel trap and fixed collision with contacts when leaving charge station.
-Fixed canbus issue, sometimes the canbus modules were not recognized (OLM module in most cases)
-New movement when following wire to improve obstacle avoidance, the mower will make a small left turn to avoid obstacle on the right side of the boundary wire
-New firmware logic to improve hi/dense grass cut performance, the mower will adapt the speed of the mower if the load on the blade is too high
-New mower behaviour on inclined grass surfaces to increase the grip, performance and avoid "out of boundary errors"
-Improved app pause command, sometimes app was reporting an error when the user pressed pause button
-Unified "App Link" text on LCD interface (app pairing page)
  • Gefällt mir
Reaktionen: Semmy und KokiS
Oben